新品 TOPTICA DL pro 場所 ミュンヘン, バイエルン州, ドイツ
新しい
Doubleclick to zoom in
売り手に連絡
追加の写真や情報を依頼する
仕様
- 状態
- 新品
- Wavelength coverage
- 369 .. 519 nm *, 628 .. 1770 nm *
- Typical power range
- 10 .. 300 mW
- Typical coarse tuning range
- 2 .. 100 nm
- Typical mode-hop free tuning range
- ≥ 20 GHz
- Typical instantaneous linewidth
- 0.6 .. 90 kHz
- Typical output beam characteristics
- 3 mm x 1 mm
- Typical output beam polarization
- linear, > 100:1
- Ase background, typ.
- < -40 dB
- Optical isolation
- Isolators are used to protect the laser diode against back reflections. This not only prevents damage to the diode but also ensures untroubled tuning and single-frequency operation. Fiber-coupling with angle-polished fibers (both ends) requires at least a single-stage isolator (> 30 dB). Double-stage isolators are needed if reflections from the experiment into the laser are expected. Fiber-coupling with non-angle-polished fibers also requires a double-stage isolator (> 60 dB).
- Fiber coupling efficiency** min. (typ.)
- 55 (65) %
- Typical long term frequency change with room temperature
- << 100 MHz / K
- Dimensions laser head (h x w x d)
- 90 x 90 x 240 / 300 mm³ ***
- Weight laser head
- 2.8 - 4.4 kg
- Dimensions control unit (h x w x d)
- 154 x 450 x 348 mm³
- Weight control unit
- 8.0 kg
- Power supply
- 100 - 240 V~, 50/60 Hz (wide range input)
- Power consumption
- Typ. < 35 W, max. 250 W
- Pc interface (pc gui included)
- Ethernet, USB, analog control
- Environmental temperature
- 15 - 30 °C (operating), 0 - 40 °C (storage and transport)
- Environmental humidity
- Non condensing
- Typical applications
- Yb ion cooling
- Peak power (mw) after the isolator, specified (typical)
- 7
- Wavelength (nm)
- 369.5
- Typical instantaneous linewidth (khz)
- 850
- Included optical isolator
- > 28 dB
- Polarisation
- linear, PER 100 : 1
- Polarisation axis
- diagonal
- Fiber coupling efficiency with fiberdock (optional), specified (typical)
- 55 %
- Replacement of laser diode
- by TPA
- Ships from stock
- no
- More power with dlc ta pro or boosta available
- no
- (even) more power with dlc ta-shg pro available
- no
- * detailed power specification after the isolator 665 - 666 nm > 15 mw 666 - 670 nm > 25 mw 670 - 673 nm > 15 mw
- ** Detailed power specification after the isolator: 778 - 779 nm: > 160 mW 779 - 788 nm: > 176 mW 788 - 790 nm: > 160 mW
- *** detailed power specification after the isolator 770 - 780 nm > 48 mw 780 - 815 nm > 65 mw
- **** Detailed power specification after the isolator: 840 - 842 nm: > 50 mW 842 - 850 nm: > 65 mW 850 - 875 nm: > 70 mW (typ. 75 mW) 875 - 877 nm: > 65 mW
- Narrow linewidth
- With this option DL pro laser systems are optimized for narrow linewidths. It is also suited for seed lasers of TA or NLO systems as well as lasers of Laser Rack Systems but not for DL pro HP lasers. DL pro F lasers are always optimized for a narrow linewidth.
- Fiber delivery
- Fiber Delivery (FD) is optionally available with TOPTICA's patented fiber coupler FiberDock and a suitable polarization maintaining (PM) fiber. FiberDock provides highest single-mode fiber coupling efficiencies, easy alignment and at the same time highest stability. For most lasers, we specify a PER behind fiber of >20 dB with our Fiber Delivery option. Please also inquire about Long Life and High Power fibers as well as fiber splitters. Optical isolation is mandatory for fiber coupled diode laser systems.
- Beam shaping
- To shape elliptical laser beams into round profiles, either an anamorphic prism pair (APP) or cylindrical lenses are used. The compression ratio is set at the factory.
- Motorization
- The motorization of the coarse tuning offers manual control and operation via software interface. This option is available for most DL pro laser systems (most AR laser diodes and some FP diodes) including DL pro HP laser systems but not for DL pro F systems. See Downloads section below.
- Bias-t
- The DL pro (HP) has two modulation inputs that allow current modulation frequencies of up to 150 MHz. A Bias-T allows even higher current modulation frequencies of up to several GHz, depending on the diode. It is also suited for seed lasers of TA or NLO systems. This option is not available for DL pro F systems.
- Electronics modules
- A broad variety of electronic locking modules is available for frequency stabilization.
- カテゴリー
- レーザー・光源 場所 ドイツ
- サブカテゴリ―
- 波長可変半導体レーザー
- リスティングID
- 60022235
説明
Intelligent locking to absorption lines or HighFinesse wavelength meters Convenient local and remote operation (with DLC pro) Efficient atom cooling with narrow linewidth down to 0.6 kHz free running Linewidth below 1 Hz possible with lock to external reference cavity on selected wavelengths The DL pro is a reliable ECDL laser for almost all wavelengths between 369 nm and 1770 nm. With power up to 400 mW and free running linewidth down to 0.6 kHz, the DL pro is a proven solution for most QT applications. Its digital controller allows a stable performance, the GUI making remote access easy, which is very convenient when the DL pro rack version is requested. It is fully compatible with the extensive TOPTICA portfolio of tunable diode lasers, driving electronics, software and accessories.