新品 DC Bias Current Test System 6632+ Series 場所 台北市, 台湾
新しい
Doubleclick to zoom in
売り手に連絡
追加の写真や情報を依頼する
仕様
- 状態
- 新品
- Frequency response
- 100Hz-3MHz
- Output current max.
- 60A
- Power consumption
- 30VA
- Units of the dc bias
- 6
- Output current (unit)
- 10A
- Current accuracy
- 0.000A-1.000A 1%+5mA
- Dcr test
- ●
- Constant power output
- ●
- Current switch
- ●
- Graphic scanning analysis
- Frequency graphic scanning analysis
- Test frequency
- 10Hz-1MHz
- Equivalent circuit analysis
- 6632S
- Frequency setting
- Continuity
- Frequency output accuracy
- ±0.01%
- Frequency resolution
- 100mHz, 6-bit Frequency Input
- Basic accuracy
- ±0.08% (typical ±0.05%)
- Ac drive level
- Test Signal Voltage Level
- Voltage minimum resolution
- 1mV
- Accuracy
- ALC ON：6％ * Current ± 20µA ALC OFF：10％ * Current ± 20µA
- Test signal current level
- 200µA - 20mArms
- Current minimum resolution
- 10µA
- Dc drive level
- 1V (fixed)
- Output impedance
- 25Ω/100Ω (switchable)
- Dc bias voltage
- Built-in ±12V(100Hz-50MHz)
- Dc bias current
- Option DC Bias Current Source(20A/60A/120A/320A)
- Measurement mode
- Meter mode, list mode, sweep mode, and optional equivalent circuit analysis function (S model)
- Measurement parameters
- |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 ESR、ε and μr
- Test time (fastest)
- < 3mS
- Parameters
- Range
- |z|
- 0.000 mΩ to 9999.99 MΩ
- R, x
- ± 0.000 mΩ to 9999.99 MΩ
- |y|
- 0.00000 μS to 999.999 kS
- G, b
- ± 0.00000 μS to 999.999 kS
- Θrad
- ± 0.00000 to 3.14159
- Θdeg
- ± 0.000° to 180.000°
- Cs, cp
- ± 0.00000 pF to 9999.99 F
- Ls, lp
- ± 0.00 nH to 9999.99 kH
- D
- 0.00000 to 9999.99
- Q
- 0.00 to 9999.99
- Δ
- ± 0.00% to 9999.99%
- Rdc
- 0.00 mΩ to 99.9999 MΩ
- Εr' εr''
- 0 to 100000
- Μr' μr''
- 0 to 100000
- Measurement circuit
- Series/Parallel
- Correction
- Open Circuit/Short Circuit/Load correction
- Cable compensation
- 0 / 0.5 / 1 /2 (m)
- Bin
- ABS、ΔABS、Δ%、OFF
- Comparator
- 9
- List mode
- 50 groups of Multi-steps setting (Each group contains up to 15 steps)
- Bulit-in storge
- 100 sets LCR setting documents, 50 groups of list mode setting
- Usb host storge
- LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data
- Trigger test
- Auto, manual, RS-232, GPIB, Handler
- Power supply
- Voltage：88-264Vac
- Environment
- Temperature：10℃-40℃
- Dimension
- DC Bias Current Source
- (w*h*d) 356x147x497 mm/6225 356x145x644 mm/6243h/6243 356x145x525 mm/6240 337x145x525 mm/6223 337x145x525 mm/6220 337x145x525 mm/6210
- (W*H*D)336x147x340 mm/6632336x147x340 mm/6632S
- Weight
- 15 Kg (6225)20 Kg (6243H/6243)15 Kg (6223)20 Kg (6240)15 Kg (6220)15 Kg (6210)
- Display
- -
- Interface
- RS-232、Handler
- カテゴリー
- LCRメータ 場所 台湾
- サブカテゴリ―
- Machinery
- サブカテゴリ― 2
- Dc bias current test system
- リスティングID
- 86551290
説明
Current and frequency graphic scanning analysis
Frequency response 100Hz-30MHz /10MHz/3MHz
DC Bias Current Output Max.640A/320A/120A/60A/20A
DCR Measurement function
Built-in the Permeability-μr
Long-term consecutive maximum power output
Direct Handler interfaces control through Impedance Analyzer
Support meter mode and list mode, sweep mode