新品 TOPTICA PFD pro 場所 ミュンヘン, バイエルン州, ドイツ
新しい
Doubleclick to zoom in
売り手に連絡
追加の写真や情報を依頼する
仕様
- 状態
- 新品
- Input signal
- Photo diode signal from the beat between two lasers
- Output signal
- Phase Locked Loop (PLL) requires PID controller like FALC pro as a loop filter
- Offset frequency range
- Not available
- Frequency range for continuous scans
- 10 MHz
- Frequency range for jumps
- 100 MHz
- Range for continuous frequency scans
- Not available
- Range for frequency jumps
- Not available
- Integrated scan generator
- Triangular scan with a maximum scan rate of 1 kHz
- External scan generator
- Triangular scan with a maximum scan rate of 1 kHz via dedicated digital input channel
- Frequency jumps
- Frequency jumps between up to 4 pre-defined frequencies (external signal generator required) Settle time (90% of target frequency value, for electrical error signal generation): 10 µs
- Integrated counter
- For monitoring of beat frequency, reference signal and intermediate frequency signal Resolution: 1 Hz (integration time of 2 s)
- Control software
- Parameter settings, activation and operation via DLC pro or via Difference Frequency Comb software
- Remote control
- Remote control via TCP/IP PC-GUI or command interface, support of remote click & lock of offset lock using DLC PRO LOCK
- Configuration options
- Support of up to 4 PFD pro and 4 FALC pro together with 4x DL pro or 2x TA pro laser systems from a single DLC pro
- Mounting options
- Table-top or rack-mountable into TOPTICA‘s 19“ T-RACK
- Electrical power requirement
- 15 or 24 V
- Size
- 54.2 x 105 x 200 mm3 (H x W x D) without mounting brackets
- カテゴリー
- レーザー・光源 場所 ドイツ
- サブカテゴリ―
- 波長可変半導体レーザー
- リスティングID
- 91876966
説明
Broad range of offset frequencies 5 MHz .. 10 GHz Support of frequency scans and jumps User friendly remote control Designed to cooperate with FALC pro TOPTICA’s brand new PFD pro is a broadband phase and frequency detector which generates an error signal from the phase and frequency difference between two lasers. It offers user friendly integration with TOPTICA lasers, control electronics and software. PFD pro enables a complete solution in which two lasers are phase locked to each other with an offset frequency which can easily be ramped or changed.Typical applications include the phase lock of an optical frequency comb to a continuous wave reference laser, phase locks of lasers to an optical frequency comb, phase locks between two single frequency lasers with large frequency offsets, frequency ramps and jumps for laser cooling sequences, frequency scans for spectroscopy or the de-drifting of ultra-narrowband cavity-stabilized lasers.