中古 test

Multichannel LCR Meter 9332 (PCB/FPC Application)

Test frequency: 10Hz-200kHz | Test channel: 64 | Measurement parameters: |Z| (Impedance)θ (Phase angle)R (Series resistance/parallel resistance)L (Inductance value)D (Loss factor)Q (Quality factor)DCR (DC Resista...

Motor Stator Testing System MT-6910 (8 Channel)

• メーカー: MICROTEST

System: Benchtop | Function: Operate directly on the instrument | Production traceability management - implementing bar code/label printer/laser engraver: / | Store test file sets: 100 sets (existing instruments)...

Motor Stator Testing System MT-6917 (17 Channel)

• メーカー: MICROTEST

System: Benchtop | Function: Operate directly on the instrument | Production traceability management - implementing bar code/label printer/laser engraver: / | Store test file sets: 100 sets (existing instruments)...

Motor Stator Testing System MT-6913 (13 Channel)

• メーカー: MICROTEST

System: Benchtop | Function: Operate directly on the instrument | Production traceability management - implementing bar code/label printer/laser engraver: / | Store test file sets: 100 sets (existing instruments)...

2-in-1 Transformer Testing System Low Voltage+Safety

Test channel: 20 | Frequency: 10Hz-200kHz | Frequency resolution: 5 digits | Basic accuracy: ±0.1% | Ac drive level: 10mV-2Vrms | Dc drive level: 10mV-2V | Output impedance: 100Ω | Turn: 0.1 ~ 99999.9 turns | Tes...

Transformer Tester 5460 Series 5465/5466/5467

Test channel: 48 | Test frequency: 10Hz-200kHz | Other: 5465 | 10hz-200khz: 10Hz-500kHz | Frequency resolution: 5 digits | Basic accuracy: ±0.1% | Ac drive level: 10mV-2Vrms | Dc drive level: 10mV-2V | Output imp...

Transformer Tester 5260 Series 5265/5266/5267

Test channel: 20 | Test frequency: 10Hz-200kHz | Other: 5265 | 10hz-200khz: 10Hz-500kHz | Frequency resolution: 5 digits | Basic accuracy: ±0.1% | Ac drive level: 10mV-2Vrms | Dc drive level: 10mV-2V | Output imp...

LCR Meter 6630 Series 1/3/5/10/20/30/50MHz

Frequency: 10Hz-1MHz | Frequency range: 10Hz-50MHz | Frequency setting: Continuity | Frequency resolution: ±0.01% | Frequency output accuracy: 100mHz, 6-bit Frequency Input | Basic accuracy: typical ±0.05% | Ac d...

Impedance Analyzer 6632 Series 1/3/5/10/20/30/50MHz

Frequency: 10Hz-1MHz | Frequency range: 10Hz-50MHz | Frequency setting: Continuity | Frequency resolution: 100mHz, 6-bit Frequency Input | Frequency output accuracy: ±0.01% | Basic accuracy: ±0.08% (typical ±0.05...

Impedance Analyzer 6632S Series 1/3/5/10/20/30/50MHz

Frequency: 10Hz-1MHz | Frequency range: 10Hz-50MHz | Frequency setting: Continuity | Frequency resolution: 100mHz, 6-bit Frequency Input | Frequency output accuracy: ±0.01% | Basic accuracy: ±0.08% (typical ±0.05...

Hi pot Tester 7630 (Single Channel)

Test channel: Single Channel | Ac output voltage: 5000V | Dc output voltage: 6000V | Insulation resistance: 12000MΩ | Output voltage: 10V-1000Vdc | Voltage resolution: 1V | Voltage accuracy: ±(3% of setting+5V) |...

Hi pot Tester 7631 (8 Channel)

Test channel: 8 | Ac output voltage: 5000V | Dc output voltage: 6000V | Insulation resistance: 12000MΩ | Expansion box: 8 Chnnels | 7508: 7516 | Output voltage: 10V-1000Vdc | Voltage resolution: 1V | Voltage accu...

Impulse Winding Tester 7750 Series 7750-10S/5S/5H/5E/1S

• メーカー: MICROTEST

Channel: 1 | Sampling rate: 200MHz/ 9bit | Voltage output: 10V-1200V | Lowest inductance: ≥ 0.1μH | Test time: 10 times/ Sec | Breakdown voltage test: ● | Lan interface: ● | Total area comparison: When layer shor...

3-in-1 Transformer Testing System Low Voltage+Safety+Impulse

Test channel: 20 | Frequency: 10Hz-200kHz | Frequency resolution: 5 digits | Basic accuracy: ±0.1% | Ac drive level: 10mV-2Vrms | Dc drive level: 10mV-2V | Output impedance: 100Ω | Turn: 0.1 ~ 99999.9 turns | Tes...

DC Bias Current Source 6210 (10A)

• メーカー: MICROTEST

Dc bias current max.: 60A | Units of the dc bias: 6 | Power consumption: 320W Max. | Output current (unit): 10A | Option lcr meter/impedance analyzer: Frequency Response | 6632: 100Hz-3MHz | Dc bias current sourc...